Owning a Xiaomi electric scooter like the M365, 1S, or Pro 2 is a great way to commute efficiently — but like any vehicle, regular maintenance is essential to keep it safe, reliable, and performing at its best.
In this complete maintenance guide, we’ll cover everything you need to know, including tyre care, brake adjustments, battery health, firmware updates, and general upkeep, all compatible across the Xiaomi M365, 1S, and Pro 2 models.
Whether you’re a daily commuter or occasional rider, these maintenance tips will help extend your scooter’s lifespan and prevent costly repairs.
Tyre Maintenance
Tyres are one of the most important — and most commonly maintained — parts of any Xiaomi scooter.
All three models use 8.5-inch pneumatic (air-filled) tyres, which provide a good balance of comfort and grip but require routine checks.
Checking Tyre Pressure
Maintaining correct tyre pressure is crucial for:
- Maximising range
- Preventing punctures
- Improving ride comfort
- Reducing motor strain
Under inflated tyres increase rolling resistance, which drains battery faster and makes punctures more likely.
The recommended tyre pressure for the Xiaomi M365, 1S, and Pro 2 is between 45–55 PSI.
Tip: Check tyre pressure weekly if you ride daily.
Preventing Punctures
Punctures are one of the most common Xiaomi scooter issues.
To reduce risk:
- Avoid rough terrain where possible
- Don’t ride with low tyre pressure
- Stay within the weight limit
When to Replace Tyres
Signs your tyres need replacing:
- Worn or smooth tread
- Visible cracks in rubber
- Frequent flats
- Reduced grip in wet conditions
If you ride daily, tyres may need replacing every 1,000–2,000 miles depending on conditions.
Solid Tyre Upgrades (Optional)
Some riders switch to solid tyres to eliminate punctures entirely.
Pros:
- No flats
- Lower maintenance
Cons:
- Harsher ride
- Less grip on wet roads
Solid Tyre Upgrade for Xiaomi M365, 1S & Pro 2
Solid vs Pneumatic Tyres for Xiaomi Scooters: Which Is Better?
Brake Maintenance
Your braking system is critical for safety, especially for commuters riding in traffic.
Xiaomi M365, 1S, and Pro 2 scooters use:
- Rear disc brake
- Front regenerative electronic brake
Adjusting Brake Tension
Over time, brake lines stretch, reducing stopping power.
Signs you need adjustment:
- Brake lever pulls too far
- Reduced stopping response
- Squeaking or rubbing noises
Adjustment usually involves adjusting the brake line near the caliper and retightening.
Checking Brake Pads
Brake pads wear down with use.
Replace them if you notice:
- Grinding sounds
- Reduced braking efficiency
- Visible pad thinning
Regular checks help avoid disc damage.
This combination delivers strong, predictable stopping power — an important factor at higher speeds.
Replacment Brake Pads for Xiaomi M365, 1S & Pro 2
Electronic Braking (E-Brake)
The front regenerative brake:
- Assists stopping power
- Reduces wear on the rear brake
- Recovers small amounts of battery energy
Keeping firmware updated ensures this system works optimally.
Battery Care & Charging
Battery health directly affects range, performance, and lifespan.
All three scooters use high-quality lithium batteries, but proper care is essential.
Charging Best Practices
To maintain battery health:
- Avoid letting battery hit 0% regularly
- Charge after rides instead of storing empty
- Use the original charger
- Avoid constant overcharging
Over time, poor charging habits reduce battery capacity.
Range Preservation Tips
To maximise range:
- Ride in eco mode when possible
- Maintain tyre pressure
- Avoid full throttle constantly
- Reduce heavy loads
Even small habits can add miles to each charge.
Storage Advice
If storing long-term:
- Keep battery around 50–70%
- Store indoors
- Avoid freezing temperatures
Cold storage can permanently damage lithium batteries.
Signs of Battery Wear
Watch for:
- Noticeable range drop
- Slower charging
- Voltage sag under load
If these appear, battery servicing or replacement may be needed.
Firmware & Software Updates
Firmware plays a bigger role than many riders realise.
Updates can improve:
- Battery efficiency
- Throttle response
- Safety systems
- Error handling
Updating Firmware
You can update firmware via the Xiaomi app:
- Connect scooter via Bluetooth
- Open scooter settings
- Check for firmware updates
- Install if available
Always ensure sufficient battery before updating.
Custom Firmware Considerations
Some riders install custom firmware for:
- Higher speeds
- Acceleration tweaks
However:
- May void warranty
- Could affect safety
- May be illegal in some regions
Proceed carefully if exploring this route.
Folding Mechanism Maintenance
A known wear point on Xiaomi scooters is the folding stem.
Over time you may notice:
- Stem wobble
- Clicking sounds
- Loose locking mechanism
Regularly:
- Tighten bolts
- Inspect latch
- Replace worn clamps if needed
Cleaning & General Care
Routine cleaning helps prevent corrosion and wear.
Best practices:
- Wipe down after wet rides
- Avoid pressure washers
- Keep water away from display and charging port
- Dry thoroughly before storage
Recommended Maintenance Schedule
| Task | Frequency |
|---|---|
| Check tyre pressure | Weekly |
| Inspect tyres for wear | Monthly |
| Adjust brakes | Monthly |
| Tighten bolts & stem | Monthly |
| Battery health check | Every 3 months |
| Firmware updates | When available |
What is the life span of the battery on M365, 1S & Pro 2?
How can I reduce punctures on my Xiaomi scooter?
How do I update firmware on Xiaomi M365, 1S & Pro 2?
Why is my Xiaomi scooter losing range?
Final Thoughts
Proper maintenance keeps your Xiaomi M365, 1S, or Pro 2 running safely and efficiently for years.
By staying on top of tyre pressure, brake adjustments, battery care, and firmware updates, you’ll not only extend your scooter’s lifespan but also improve ride quality and safety.
A little routine upkeep goes a long way — especially for daily commuters relying on their scooter every day.
