Many electric scooters are shipped with speed limits enabled by default. These limits are often designed for safety, beginner riders, or regional regulations. On some models, unlocking the full speed of the scooter can be done easily through the display controls.
In this guide, we explain how to unlock full speed on the following scooters:
These models use a similar display system that allows riders to toggle the speed limiter using the M button on the scooter display.
Why iENYRID Scooters Have Speed Limits
Electric scooters often include a speed limiter for several reasons.
Safety for new riders
Many scooters start in a restricted speed mode to help beginners become comfortable before using the scooter at full performance.
Legal requirements
Some countries and regions require scooters to be limited to lower speeds on public roads.
Battery efficiency
Lower speeds can help increase battery range and reduce power consumption.
Because of these reasons, some scooters may arrive with a speed restriction enabled from the factory.
How to Unlock Full Speed on iENYRID Scooters
Unlocking the full speed on these iENYRID models is very simple and can usually be done directly from the display.
Steps to unlock the speed limiter
- Turn on the scooter display
- Locate the M button on the display unit
- Press the M button 5 times quickly
- The speed limiter will toggle on or off
After completing this process, the scooter should allow its maximum speed setting.
Unlocking Speed on Each Model
Although the scooters have different performance levels, the process for unlocking speed is the same.
Unlocking Speed on the iENYRID ES1
The iENYRID ES1 uses a simple display interface that allows the speed limiter to be toggled through the M button.
Press the M button five times quickly to switch between restricted and full speed modes.
This allows the scooter to operate at its normal top speed.
Unlocking Speed on the iENYRID S1
The iENYRID S1 follows the same method for unlocking speed.
Steps:
- Power on the scooter
- Press the M button five times quickly
- The scooter will toggle between speed modes
Once unlocked, the scooter will operate at its full performance capability.
Unlocking Speed on the iENYRID M4 Pro S+
The iENYRID M4 Pro S+ also uses the same display system.
To unlock full speed:
- Turn on the scooter
- Press the M button five times rapidly
- The speed limiter will toggle
After unlocking, the scooter can reach its maximum speed setting depending on riding conditions.
Things to Consider Before Unlocking Full Speed
Before unlocking the speed limiter, it is important to consider a few factors.
Safety
Higher speeds require more control and longer stopping distances.
Protective gear
Wearing a helmet and protective equipment is always recommended.
Local regulations
Some regions have laws limiting electric scooter speeds on public roads.
Always ensure you ride responsibly and understand local rules.
Common Reasons Your Scooter May Still Be Speed Limited
Sometimes riders unlock the limiter but still notice reduced speed.
Possible causes include:
- low battery level
- eco or low-power riding mode
- steep inclines or heavy load
- tyre pressure affecting performance
Checking these factors can help ensure the scooter reaches its maximum performance.
What is the top speed of iENYRID scooters?
Does unlocking speed damage the scooter?
Why is my iENYRID scooter limited to a low speed?
Does unlocking the speed limiter affect battery range?
Final Thoughts
Unlocking the full speed on an iENYRID scooter is a simple process that can usually be done directly from the display controls. By pressing the M button five times quickly, riders can toggle the speed limiter and allow the scooter to operate at its maximum performance.
Whether you ride the iENYRID ES1, iENYRID S1, or iENYRID M4 Pro S+, understanding how to access the scooter’s full performance can help you get the most out of your ride.
